Mario Strikers

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150.98x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 3mm and the Actual Depth is 2.6mm Filaments Used: PLA BambuLab Basic Jade White Transmission Distance: 5 PLA+ Sunlu Yellow Transmission Distance: 10 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Black Transmission Distance: 0.6 This print uses 4 unique filaments Swap Instructions: Start with Jade White At layer #10 (0.88mm) swap to Yellow At layer #27 (2.24mm) swap to Red At layer #31 (2.56mm) swap to Black for the rest.