Market Tablet Stand For Box Storage

This Tablet Stand clips on to the side of the wire framed box that some use at their market stalls. NOTE Make sure you select the correct print profile for each plate NOT SUITABLE FOR A1 MINI ** some assembly is required but it is straight forward and just a bit of super glue and 2 x M3 x 15mm screws are required. instructions for assembly:- 1 start by gluing the bottom plate to the main plate, there is a small printed guide to equal out the distance either side.( should be 15mm from 1 edge. 2. glue the hinge to the back and use the same printed guide turned 90 degrees. ensure the hinge sits against the bottom support to ensure the hinge sits vertical. 3. assemble the support arms with 2 screws and fold them flat against the main plate.(this helps when gluing the top frame clips in 4. glue top clips in place by resting against the folded arms. And your done :)