Thingiverse
Marlin Model 60 Muzzle Brake
von comradezoned
27
Downloads
19
Likes
0
Makes
WIP! I realize I made some mistakes making this. Please standby while I work on this.
Took around 30 minutes in Fusion 360.
The Low Tolerance has a slightly larger diameter barrel hole/deviation that should be less likely to crack when fitting.
Has 8 total slots (Probably overkill, but whatever.) at a reversed 40 degree angle. Hexagonal-ish ports flare out slightly as the gasses expand, probably not the most efficient design.
Uploaded before I tested, no guarantees this will work properly - then again, it's .22LR, why bother using this, other than for laughs?
Design I "remixed" from has the gas ejection ports facing the wrong direction and has a huge bore - a design that would theoretically increase recoil.
Took around 30 minutes in Fusion 360.
The Low Tolerance has a slightly larger diameter barrel hole/deviation that should be less likely to crack when fitting.
Has 8 total slots (Probably overkill, but whatever.) at a reversed 40 degree angle. Hexagonal-ish ports flare out slightly as the gasses expand, probably not the most efficient design.
Uploaded before I tested, no guarantees this will work properly - then again, it's .22LR, why bother using this, other than for laughs?
Design I "remixed" from has the gas ejection ports facing the wrong direction and has a huge bore - a design that would theoretically increase recoil.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
