Mars

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in size and 200x200mm. Or You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct.You may print at higher layer heights below the Base Thickness of 0.56mm.The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mmFilaments Used:PLA ******+ Black Transmission Distance: 0.3PLA Sunlu META Grey Transmission Distance: 3PLA ****** + Red Transmission Distance: 3.7PLA ****** + Orange Transmission Distance: 4PLA ****** + Yellow Transmission Distance: 4PLA ******+ White Transmission Distance: 8.9This print uses 6 unique filamentsSwap Instructions:Start with BlackAt layer #10 (0.88mm) swap to GreyAt layer #12 (1.04mm) swap to RedAt layer #17 (1.44mm) swap to OrangeAt layer #19 (1.6mm) swap to YellowAt layer #20 (1.68mm) swap to White for the rest.