Marth - ChromaLink

This is designed to use the ChromaLink frame made by Superseaslug. It can be printed on it's own but it's meant to be hung up using the kit found here. The Model is 173.3x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.16mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 4.3 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Black Transmission Distance: 0.6This print uses 5 unique filamentsSwap Instructions (these are the modified values for ChromaLink. If you are just using the hueforge stl refer to the marth_describe.txt file): Start with Black At layer #17 (2.96mm) swap to Red At layer #22 (3.36mm) swap to Yellow At layer #25 (3.6mm) swap to Jade White At layer #30 (4.00mm) swap to Blue At layer #33 (4.24mm) swap to Black At layer #37 (4.56mm) swap to Jade White fo