Marvel Dr Strange Hueforge

Superheroes from Marvel, - Dr. Strange! Print Instruction:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.7x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.32mm and the Actual Thickness is 2.24mm Filaments Used: #000000 PLA Black Transmission Distance: 0.1 #6a89a7 PLA Blue Grey Transmission Distance: 2.8 #c00d1e PLA Basic Red Transmission Distance: 4 #ffffff PLA Basic Jade White Transmission Distance: 5 #814100 PLA Brown Transmission Distance: 2.8This print uses 5 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue Grey At layer #8 (0.72mm) swap to Black At layer #10 (0.88mm) swap to Red At layer #14 (1.2mm) swap to Jade White At layer #15 (1.28mm) swap to Brown At layer #22 (1.84mm) swap to Jade White for the rest. For only one AMS,Start with 4 colors as follows,Slot1: BlackSlot2: Blue GreySlot3: RedSlot4: WhitePause was set at Layer #9