Master Chief Hueforge Bookmarks - 2 sizes

Master Chief Hueforge Bookmarks - 2 sizes Large 65mm x 200mm Bookmark Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 65.03x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.1mmThe Max Depth is 3.1mm and the Actual Depth is 2mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.2PLA PolyLite Jungle Green Transmission Distance: 0.3PLA PolyLite Olive Green Transmission Distance: 0.5PLA BambuLab Basic Jade White Transmission Distance: 5.8This print uses 4 unique filaments ***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time******the layer numbers will be different but the layer height will be the same*** Swap Instructions:Start with BlackAt layer #15 (1.28mm) swap to Jungle GreenAt layer #16 (1.36mm) swap to Olive GreenAt layer #17 (1.44mm) swap to Jade White for the rest. Small 50mm x 150mm Bookmark Print at 100% infill with a layer height of 0.08mm with a