Master Chief | HueForge

by heyderekp

79 Downloads

56 Likes

43 Makes

Download Model

halo masterchief 117 john117 hueforge blackandwhite halo3 john-117 unsc 2D 2dwallart

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.4mmThe Model is 200x112.09mm in sizeYou may print at higher layer heights below the Min Depth of 1.1mmThe Max Depth is 2.3mm and the Actual Depth is 2.4mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filaments Swap Instructions: Start with Black At layer #13 (1.36mm) swa