Master Sword Ring Holder – 3D printable model from MakerWorld

MakerWorld

Other Fashion Models

Master Sword Ring Holder

by noam.vaanunu · Other Fashion Models

67 Downloads

35 Likes

31 Makes

Go to Model

A master sword in its pedestal, to hold your rings. Obviously can be used as a standalone sculpture if you so please. The pedestal is modeled after the BOTW pedestal. I don't have an MMU or AMS type system, but if printed in multi color, this has potential to be a very cool addition to any household. I printed with a 0.6mm nozzle at a 0.3mm layer height, would recommend going down to 0.2mm for the layers to really maximize the details on the sword. Print with supports touching buildplate only, to support the sword as its printed.

rings ringholder

Category

Other Fashion Models

Source

MakerWorld

Published

24.01.2024

Updated

30.04.2026

What you need to print this: Intermediate

Why?

supports needed · 2 colors · 0.30mm layers

Single piece Supports required 2 colors / AMS

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

50 mm (Small)

Colors

2 (AMS/MMU recommended)

Layer height

0.3 mm

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Master Sword Ring Holder?

Any FDM printer should handle Master Sword Ring Holder just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Master Sword Ring Holder need supports when printing?

Yes, Master Sword Ring Holder will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

Is Master Sword Ring Holder beginner-friendly?

Master Sword Ring Holder is a mid-level print. A bit of experience helps, but it's nothing a careful beginner can't tackle with standard slicer settings.

What file format is Master Sword Ring Holder available in?

Master Sword Ring Holder is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Master Sword Ring Holder free to download?

Yes, Master Sword Ring Holder is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL