Matrix Revolutions - hueforge

Hueforge of matrix revolutionsThe photos shows the result in 200*133mm and a nozzle of 0.4Boost MeThanks for your boost!You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament on the indicated layers. You can use filaments other than those indicated, but the result will differ. You can use any black PLA Hueforge descriptionPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.2mmThe Model is 133.33x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.6mmThe Max allowed Thickness is 2.36mm and the Actual Thickness is 1.6mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filaments Swap Instructions: Start with BambuLab Basic Black At layer #16 (0.8