Mavic 3 Propeller Case - Slimline

These 3D printable cases are designed to add protection for DJI Mavic 3 Propellers when travelling or in storage. The slimline design keeps the props easily accessible.

**LIKE this design, or COMMENT if you have feedback! It will help me make more great designs - Thanks!**

To stow in the case; the propellers are folded (with third pin on the same side as blades), placed in the correct mount and then rotated down and held in place by the bump clip.
To remove from the case; push gently through the opening at the back and push up, rotate the propeller vertically and then the propeller can come away from the case.
**IMPORTANT: There is a distinct model for each prop orientation - Counter-Clockwise and Clockwise. Note the 'circle' indicator on the Counter-Clockwise model.**

Steps on how to use the case...



#### Compatibility
This has been tested with the Mavic 3 Low-Noise Propeller ([M3LNPR](https://store.dji.com/product/dji-mavic-3-low-noise-propellers)). It should work