Mechanical Bunny Pendant

Stylized bunny pendant with rotating ears and eyes. Goes from a sleepy expression with hidden ears to a happy expression with the ears up and alert. Very simple to assemble but requires a fairly precise print. Feel free to scale it up if your printer has troubles with the finer detailed parts.

I printed it on a Prusa Mk3S at 0.1mm resolution at 20% infill. The infill density doesnt really matter but I wouldnt go too much lower than 20%. I also used the "Elephant Foot Compensation" setting on my slicer with a 0.2mm setting to help prevent the first layer of the gears expanding too much and making clean-up a pain. The gears need to be very accurate at the default scale otherwise the parts will not fit properly and you will have to go in and sand/file down each tooth (ugh...) so I strongly advise shrinking the first layer by at least 0.2mm to make your life easier.

Once printed, only a few dabs of superglue are necessary to connect the parts.

Be sure to print two copies of