Medieval Wall Torch / Sconce

This is an easily printable torch style wall sconce to use with one of the LED “Flame” bulbs as seen in the photos. I saw a post similar to this, where the creator had designed a similar torch for his D&D gaming room, but it was all print in place, and I dislike wasting material - additionally, the pieces were too thick for my liking, so I redesigned it to be easily assembled with a little glue and to be able to print without supports. This was designed for very specific parts that I bought from Amazon, which I have linked below. Also, please know that I'm using affiliate links, so I may get a small commission if you purchase any of these items using my links. All parts are 2 walls, 3 bottom layers, 4 top layers, and 15% cubic infill. I have uploaded a profile for a 0.4mm nozzle and .2mm layer height, but it prints very nicely at .28mm layer height as well, and saves a significant amount of time when printing, especially if you're going to paint any of these parts. There is also a diff