Medium Battery Caddy for EDC

A medium sized battery caddy for everyday carry in tool or range bags for those who often end up needing to swap out traditional batteries. The cover is kept in place with two 3dia x 3mm N42 Magnets (https://www.first4magnets.com/product/3mm-dia-x-3mm-thick-n42-neodymium-magnet-029kg-pull-19729?variant=1157) Printed in PETG using PLA/PETG Support for the small support interfaces, and PETG Translucent for the cover, allowing you to instantly see if you've got the required battery size. The Caddy will store 2 of AA2 of AAA1 of A23 (12V)1 of CR123A 2 of LR442 of CR16204 of CR2016, CR2025, or CR2032 To assemble, simply remove the support, you may need to ream the 3mm magnet hole out using a 3mm reamer or drill bit (depends on magnet tolerance, where OD varies from batch to batch). Add a drop of superglue to the hole, and press the magnet in until flush using a suitable tool. Make sure that the magnets are oriented to attact each other when the cover is slid over the caddy. Populate wit