Slicer Discord
Medumat Standard a wall mount – 3D printable model from Thingiverse Thingiverse

Medumat Standard a wall mount

by ProSMP
1 Downloads
0 Likes
0 Makes
Go to Model
💥Все наши контакты на одной странице: https://hipolink.me/prosmp
Канал на YouTube: https://www.youtube.com/@prosmp
Канал "Про СМП" в Rutube: https://rutube.ru/channel/23667661/
Наш канал в Telegram: https://t.me/prosmp
Группа Вконтакте: https://vk.com/pro_smp

Крепление аппарата ИВЛ Weinmann Medumat standard a к стене. Чтобы закрепить аппарат, надо выкрутить 4 самореза на задней поверхности по углам аппарата. Затем саморезами 3x30 или 3x35 с полукруглой головкой и двумя винтами М4 х 10-12 мм прикрутить крепление к аппарату. Для крепления на стену нужно 4 самореза с широкой плоской головкой.



Weinmann Medumat standard a ventilator wall mount. To secure the device, you need to unscrew 4 screws on the back surface at the corners of the device. Then use 3x30 or 3x35 self-tapping screws with a semicircular head and two M4 x 10-12 mm bolts to screw the mount to the device. For wall mounting you need 4 self-tapping screws with a wide flat head.
Source
Thingiverse
What you need to print this: Intermediate Low confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

ProSMP also publishes on

90 additional models across 1 more platforms

Verified by matching model titles across platforms.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection