Medusa

It is possible to print without material system by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm You may print at higher layer heights below the Min Depth of 0.56mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA Elegoo+ Black Transmission Distance: 0.3 PLA BambuLab Basic Dark Gray Transmission Distance: 1.4 PLA Sunlu Matte Clay Transmission Distance: 2 PLA Elegoo + White Transmission Distance: 7 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Dark Gray At layer #8 (0.72mm) swap to Clay At layer #11 (0.96mm) swap to White for the rest.