Thingiverse
meepo remote toggle -for V2 remote only.
door jonnyg30
11
Downloads
9
Likes
1
Makes
IMPORTANT PLEASE READ BEFORE PRINTING!:
This toggle is designed as a replacement/upgrade part for the version 2 meepo remote only, it will not fit the V1 remote.
How to tell the difference:
V1 remote - only has a 2 position speed switch (fast and slow), the reverse button sits proud of the housing.
V2 remote - has a 3 position speed switch (low, medium and high), the reverse button is flush with the casing.
This was designed to be printed in ABS but PLA should work fine, the dowel is slightly oversized on purpose so it still fits tightly when acetone welded so it will require touching up with a file/abrasive paper. for PLA you will have to use cyno or some other adhesive of your choice.
Through the design phase i made numerous attempts to get this to print correctly witha good finish in one piece but unfortunately the prints either failed or gave an unsatisfactory finish so I made a compromise and decided to print in 3 separate sections which worked perfectly (albeit
This toggle is designed as a replacement/upgrade part for the version 2 meepo remote only, it will not fit the V1 remote.
How to tell the difference:
V1 remote - only has a 2 position speed switch (fast and slow), the reverse button sits proud of the housing.
V2 remote - has a 3 position speed switch (low, medium and high), the reverse button is flush with the casing.
This was designed to be printed in ABS but PLA should work fine, the dowel is slightly oversized on purpose so it still fits tightly when acetone welded so it will require touching up with a file/abrasive paper. for PLA you will have to use cyno or some other adhesive of your choice.
Through the design phase i made numerous attempts to get this to print correctly witha good finish in one piece but unfortunately the prints either failed or gave an unsatisfactory finish so I made a compromise and decided to print in 3 separate sections which worked perfectly (albeit
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
