Megatron Gen 1 Hueforge

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 154.46x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA Elegoo Black Transmission Distance: 0.2 PLA Elegoo White Transmission Distance: 5.5 PLA Elegoo Grey Transmission Distance: 2.2 PLA SILK Elegoo Blue_Purple_Black Transmission Distance: 4 PLA Elegoo Dark Bule Transmission Distance: 2.8 PLA Elegoo True / Ruby Red Transmission Distance: 4.3This print uses 6 unique filaments !!!! It is possible to print this hueforge with a single AMS unit just organize your filament swap in away that makes the most sense to you !!!!! Swap Instructions: Start with Black At layer #20 (0.92mm) swap to White At layer #21 (0.96mm) swap to Grey At layer #22 (1mm) swap to Blue_Purple_Black At layer #23 (1.04mm) swap to Dark Bule At layer #24 (1.08mm) swap to Grey At layer #27 (1.2mm) swap to White At layer #29 (1.28mm