Mercury 1 remix

Mercury 1 mod mod..

Steppers moved to the front. Included mounts for the rear, but can use the original Mercury mounts.

You will need QTY:8 6.5mm long 3mm inserts, 5-5.5mm wide.
5mm bolt washers, 1-2mm thick for the rear mounts and the stepper motors, QTY:8
QTY:4 30mm long 3mm socket cap bolts for the front left motor mount.
QTY:4 45mm long 3mm socket cap bolts for the front right motor mount.
QTY:12 5mm T nuts
Various length 5mm bolts for the mounting of the stepper motor mounts and rear idler brackets.
QTY: 16 .5mm thick 5mm bore bearing shims or QTY:8 1mm thick 5mm bore bearing shims. Get the ,5 so you can measure the height of the bearing rests and file if needed, add one more shim if needed.
QTY: 10 F695 bearings - 2 for the stepper motors and 4 for the rear idlers.
Belts need to be flipped and use all F695 bearings for the idlers and motor shaft support
QTY: 4 50mm long 3mm bolts for the tension of the stepper motor mount.
QTY:2 2mm, 8mm long bolts (Y-limit switch