Merry Christmas (HueForge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x112.57mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Mistletoe Green Transmission Distance: 2PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #10 (0.88mm) swap to RedAt layer #13 (1.12mm) swap to GreenAt layer #20 (1.68mm) swap to Ivory White for the rest. Remember if you sant to scale, do it only with x and y axis, z must be the same as original.