Meshtastic Solar Case 0.1

My first iteration of a solar case. I tested this with a heltec t114 but this could fit other devices. This currently only supports these solar panels from amazon. https://www.amazon.com/dp/B07BMMHMSJ In testing, these panels aren't enough to charge the battery. I used panels that were 2.08"x1.18". The inside is designed to be 70mm x 60mm x 13.25mm to fit your hardware. You can reconfigure in the freecad file using the settings varset. I taped everything down, but I would like to design mounting for the battery and heltec (or whatever device I decide on) Parts List: jst 1.25 wire/connector https://www.amazon.com/dp/B013JRWCBU Heltec T114 (with screen fits) https://www.amazon.com/dp/B0DP6LYGVY 5v solar panel (2.08"x1.18") https://www.amazon.com/dp/B07BMMHMSJ Meshnology 1100mah (Others may fit but this is what I used) https://www.amazon.com/Meshnology-1100mAh-102540-Protection-Insulated/dp/B0F1FN9BY6?ref_=ast_sto_dp Heat Tape (Or whatever you choose) https://www.amazon.com/dp/B07FQMLKB