Slicer Discord
Meshtastic Tree RAK19003 + battery case – 3D-Druckmodell von Thingiverse Thingiverse

Meshtastic Tree RAK19003 + battery case

von Willi3ar
1 Downloads
4 Likes
0 Makes
Zum Modell
I intended this for deer camp. I'm going to use a wrist rocket slingshot to launch a weight attached to a fishing line to get a string up and over a high tree branch. Then, I'll replace the weight with this meshtastic case and hoist it up to the top of the tree. On a perfect sphere the size of Earth with no obstructions, line of sight at 5 feet (in your hand) is 2.7 miles. Putting this up at 30 feet increases that line of sight to 6.7 miles. This wouldn't be realistic in practice because stuff gets in the way but, you see my point how just a little bit of height can really make a difference.
This model has three parts: An outer tube, inner tube, and a cap. The battery (designed for two 18650's) and antenna wire goes in the outer tube first, then the inner tube, connect all the wires, place the RAK19003 on the spot on the inner tube and slide the inner tube into the outer tube. Test that all connections are working, then screw on the cap.
I suggest making this of PETG, ABS, or some mo
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA, ABS, PETG
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen