Messerschmitt Bf 109

Messerschmitt BF 109 If you resize the model make sure you do not scale the Z axis or the print colors will not be in the same position Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x114.29mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Jade White At layer #16 (1.36mm) swap to Red At layer #20 (1.68mm) swap to Yellow At layer #24 (2mm) swap to Jade White for the rest.