Meta Quest 3 Adjustable Strap

Adjustable Meta Quest 3 head strap with ratcheting mechanism. Hardware Required:(4x) M1.7x4 screws(4x) M1.7x10 screws(3x) M1.7x8 screws(2x) 22x2 O-Rings(1x) 14x2.5 O-RingUniversal Helmet Pad Kit (available here) Assembly Instructions:Step 1: Grab your CA glue and carefully mount the Ring Gear into the back recess of the Tensioner Enclosure. Make sure to avoid gluing directly into the pre-existing screw holes. Step 2: Attach the Gear Plate to the inside compartment of the Tensioner Enclosure using the four M1.7x4 self-tapping screws. Step 3: Now, it's time to insert the right and left side Strap Rack parts. Keep in mind that when looking at the device, the right strap will be on the left and vice versa. Insert one side and then the other, ensuring the teeth on the L and R Strap Rack align at either end of the straight gear. Step 4: Install the 14x2.5 O-Ring around the gear shaft of the Dial and then insert the dial into the Knob. Ensure the Dial teeth align with the corresponding posts