Metabo 18v Lamp

Simple workshop lamp for battery form 18v metabo drill.

To assemble this project you need:
* M3 x 20 - 4pcs (for bottom part)
* M3 x 10 - 4pcs (for top part)
* Adjustable step down module (I use LM2596)
* Male wire connector 6.3mm - 2pcs https://www.amazon.com/Baomain-disconnects-Insulated-Connector-Electrical/dp/B01G51ELT8/ref=sr_1_13?dchild=1&keywords=male+crimp+6.3mm&qid=1606804924&sr=8-13
* Power switch (I use switch from old machine so the hole might be to tight for your switches but you can grind a little bit)
* Led Lamp for example this one: https://www.amazon.com/Liteway-2Pcs-LED-Work-Light/dp/B07D8P6914/ref=sr_1_23?dchild=1&keywords=12v+led+lamp&qid=1606803700&sr=8-23
* some wires, hot glue and 2 part epoxy glue.

ATTENTION:
Some of led lamp work only in specyfic voltage. I used a 12V lamp so I need step-down module. If you buy lamp with voltage range you probably don't need to use this module.

When you use step-down module check twice output voltage.