Metal Gear Solid - Solid Snake Hueforge

Project: Metal Gear Solid Snake.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 240x240mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.9mmFilaments Used:PLA Black Transmission Distance: 0.6PLA White Transmission Distance: 5PLA Yellow Transmission Distance: 6PLA Red Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #10 (0.88mm) swap to WhiteAt layer #12 (1.04mm) swap to YellowAt layer #15 (1.28mm) swap to RedAt layer #17 (1.44mm) swap to Jade White for the rest.