Metallica Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 131.16x200.01mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #7d6556 PLA BambuLab Matte Dark Brown Transmission Distance: 2 #ae835b PLA BambuLab Matte Caramel Transmission Distance: 1.5 #a6a9aa PLA BambuLab Basic Silver Transmission Distance: 0.5This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #9 (0.8mm) swap to Dark Brown At layer #15 (1.28mm) swap to CaramelBorder Only Colors from here until the end. At layer #20 (1.68mm) swap to Silver for the rest.