Metallica Load

Project: Metallica LoadPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.8mmThe Max allowed Thickness is 2.56mm and the Actual Thickness is 2.08mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 #bb3d43 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 #9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #15 (1.28mm) swap to Jade White At layer #22 (1.84mm) swap to Pumpkin Orange At layer #23 (1.92mm) swap to Dark Red At layer #24 (2mm) swap to Maroon Red At layer #25 (2.08mm) swap to Red for the rest. Note: I use Bambu PLA for all of my prints. If you substitute different