Slicer Discord
Metric M6 Bolt Nut – 3D-Druckmodell von Thingiverse Thingiverse
Metric M6 Bolt Nut – Bild 1 Metric M6 Bolt Nut – Bild 2 Metric M6 Bolt Nut – Bild 3 Metric M6 Bolt Nut – Bild 4 Metric M6 Bolt Nut – Bild 5 Metric M6 Bolt Nut – Bild 6

Metric M6 Bolt Nut

von sirdiesel
602 Downloads
452 Likes
4 Makes
Zum Modell
Collection of bolts M6 Bolts and corresponding Nut.

I got good results with %50 infill and .2 mm layer height. For sturdier Bolts I recomment 100% infill.

Bolts and Nuts have 2 mm thread pitch.

Thanks for BloodyPeanuts for his/her comments. He achieved better result with following settings:
Nuts as-is with 60% infill
Bolts at 93% scaling for x and y and 100% for Z with 100% infill
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
0.20mm Schichten
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Schichthöhe
0.2 mm
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen