Mew Hueforge 7x5

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 175x122.73mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mmPLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Purple Transmission Distance: 1.1PLA BambuLab Basic Hot Pink Transmission Distance: 3.9PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to PurpleAt layer #14 (1.2mm) swap to Hot PinkAt layer #18 (1.52mm) swap to Jade White for the rest. You may scale the width and length but do not change the height, the print will fail.