Thingiverse
MGN12 Linear Rail Adjustable End Stop Mount
48
Download
33
Likes
0
Makes
This is a simple adjustable, clamping mount for an MGN12 linear rail. As I haven't yet finalized my plans for supporting the linear rails on my Anet E12 I went ahead and designed this mount so I could use the printer in the mean time. This places the end stop just 1mm above the MGN12 rail so it can trigger successfully from the MGN12H block.
Originally I designed this to use some M2 screws to hold the limit switch but decided against it as it added too much height for how I wanted mine to work but if you have dimensions for me I'm happy to adjust it and add allowances for screws.
You Will Need:
2x M3x8 screws (shorter can work, M3x8 was the shortest I had on hand)
Printed at 0.2mm layer height with supports on build plate only. I highly recommend slowing down your print for the retraction heavy portion to give the layers time to cool. I ended up printing the top at one corner and the bottom at the opposite corner just to artificially add more cooling time.
Originally I designed this to use some M2 screws to hold the limit switch but decided against it as it added too much height for how I wanted mine to work but if you have dimensions for me I'm happy to adjust it and add allowances for screws.
You Will Need:
2x M3x8 screws (shorter can work, M3x8 was the shortest I had on hand)
Printed at 0.2mm layer height with supports on build plate only. I highly recommend slowing down your print for the retraction heavy portion to give the layers time to cool. I ended up printing the top at one corner and the bottom at the opposite corner just to artificially add more cooling time.
gtrslngrchris pubblica anche su
14 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
