Thingiverse
Mic Stand Desk Mount
by Naomiiiiiiii
21
Downloads
28
Likes
0
Makes
**__Ko-Fi:__** [https://ko-fi.com/juliettaexpress](https://ko-fi.com/juliettaexpress)
---
Desk mount for a Pyle PMKSH01 microphone mount that replaces the trash clamp mounts that invariably warp out of shape. Designed for four socket cap M5 bolts, four washers, and nylocs, though wood screws can also be used. Smooth bed surfaces (FR4, glass, etc.) are best to avoid friction. Print with PLA and install with the side that touched the bed on the top for smoothest results. Depending on your machine config, the rod might not go all the way through the hole -- if there is a gap, but the rod is in the hole, do NOT force it, this will only make the mount last longer and avoid unnecessary scratching.
Link to the microphone mount in question:
https://amazon.com/gp/product/B00VIDJBXK
This might also work on other microphone mounts, but your mileage WILL vary if you do so.
---
Desk mount for a Pyle PMKSH01 microphone mount that replaces the trash clamp mounts that invariably warp out of shape. Designed for four socket cap M5 bolts, four washers, and nylocs, though wood screws can also be used. Smooth bed surfaces (FR4, glass, etc.) are best to avoid friction. Print with PLA and install with the side that touched the bed on the top for smoothest results. Depending on your machine config, the rod might not go all the way through the hole -- if there is a gap, but the rod is in the hole, do NOT force it, this will only make the mount last longer and avoid unnecessary scratching.
Link to the microphone mount in question:
https://amazon.com/gp/product/B00VIDJBXK
This might also work on other microphone mounts, but your mileage WILL vary if you do so.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!