MICHAEL JORDAN HUEFORGE

Project: MJ coupe street art.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Silver Transmission Distance: 2 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #9 (0.8mm) swap to Grey At layer #10 (0.88mm) swap to Silver At layer #12 (1.04mm) swap to Red At layer #16 (1.36mm) swap to Yellow At layer #22 (1.84mm) swap to Silver At layer #24 (2mm) swap to Jade White for the rest. POUR CEUX QUI N ON QU UN SEUL AMS PAUSE LIGNE 11NOIR-