Michael Myers Hueforge

Project: michael myers.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.52mmFilaments Used: #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #db3e14 PLA PolyTerra Muted Red Transmission Distance: 1 #f78e0e PLA PolyTerra Sunrise Orange Transmission Distance: 2.5 #e5c8a2 PLA PolyLite Cream Transmission Distance: 2 #e6dede PLA Overture Matte White Transmission Distance: 3.7This print uses 6 unique filamentsSwap Instructions: Start with Charcoal At layer #10 (0.88mm) swap to Blue Gray At layer #12 (1.04mm) swap to Muted Red At layer #14 (1.2mm) swap to Sunrise Orange At layer #15 (1.28mm) swap to Cream At layer #16 (1.36mm) swap to White for the rest.