Michael Schumacher hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 230x129.02mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA Kingroon Red Transmission Distance: 4.2PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #8 (0.72mm) swap to Blue GrayAt layer #13 (1.12mm) swap to RedAt layer #20 (1.68mm) swap to White for the rest.