Michael vs Lucifer

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm The Model is 500x220mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmI would not recommend scaling the 3MF files unless you are sure you can match the edges correctly. I included the full STL before the cut so you can scale it then cut it using Bambu Studio.Scale only along the X and Y axis., do not change Z height. Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.88mm) swap to Blue Gray At layer #13 (1.28mm) swap to Gray At layer #17 (1.6mm) swap to Jade White for the rest.