Micro Drone Propeller Thrust Testing Jig (8520 Coreless Motor)

This is a small test jig I made in order to measure the level of thrust generated by 3d-printed propellers.

Check the pictures for a general idea of how the thing comes assembled. I used a few M8 bolts, washers and nuts to hold the main assembly. The smaller screws are all M3.

The motor holder houses the [8520 coreless motor](https://www.amazon.com/s/ref=as_li_ss_tl?url=search-alias=aps&field-keywords=8520+coreless+motors&rh=i:aps,k:8520+coreless+motors&linkCode=sl2&tag=props_tverse-20&linkId=2138712eb15f117663d34376c79a4b48).

At the base of the arm I used two [SMR63ZZ](https://www.amazon.com/s/ref=as_li_ss_tl?url=search-alias=aps&field-keywords=8520+coreless+motors&rh=i:aps,k:8520+coreless+motors&linkCode=sl2&tag=props_tverse-20&linkId=2138712eb15f117663d34376c79a4b48) bearings that allow the arm to pivot easily.

The scale I use is from Kenex. It's an older model, but you can find the equivalent at this [link](https://www.amazon.com/s/ref=as_li_ss_tl?url=search-alias=aps