micro-flyer: tiny indoor glider toy

A working tiny toy glider plane that designed to fly indoors. Easy to print and use! When printing, use 0.08mm layer height and 0.08mm initial layer height, as well as 100% infill or many wall loops to make the weight in the front solid. The main print profile is already configured and ready to print!This plane was designed and tested using PLA. Other filaments may cause issues.If your printer has consistent issues with bed adhesion, you may have trouble printing this. It may help to go at 50% speed and increase the bed temperature by 10 degrees. When printing finishes, remove the build plate from the printer but do not remove the plane yet. Wait about 30 seconds for the plate to cool down a bit, and gently blow on the plane to soften the bed adhesion to make it easier to remove without a scraper. You should be able to bend the build plate in multiple directions until the plane comes unstuck. Be very gentle removing the plane from the build plate!!!! Before you fly it, bend the smaller