Thingiverse
Micro Formicarium
door tomellericcardo
48
Downloads
34
Likes
0
Makes
This is a multi-layer ant nest I made from scratch.
I suggest to print the formicarium piece into a light color to increase visibility.
To assemble it you will need:
- a piece of glass (or plexiglass) of ~44x29x2.3mm (between the formicarium and the top frame)
- a piece of quite thick metal net of ~45x30mm (between the formicarium and the bottom frame)
- 4 bolts of 4x20mm (to secure the layers together)
- some cotton (to fit inside the normal container or the simple one and fill with water)
- a 8mm hose (for connections)
I suggest to print the formicarium piece into a light color to increase visibility.
To assemble it you will need:
- a piece of glass (or plexiglass) of ~44x29x2.3mm (between the formicarium and the top frame)
- a piece of quite thick metal net of ~45x30mm (between the formicarium and the bottom frame)
- 4 bolts of 4x20mm (to secure the layers together)
- some cotton (to fit inside the normal container or the simple one and fill with water)
- a 8mm hose (for connections)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
