Micro Talon Pro 700mm

I designed this micro talon pro. It's pretty neat. Still a work in progress. Figured I'd go ahead and upload it in case anyone wanted to start printing one.

Everything is printed zero infill except wing locks, motor mount, and nose plate are printed 100%.

BOM:

You'll need a 6 x 500mm CF spar, and a 3mm CF rod, or you can use bamboo skewers, either work and they aren't that structural. You also need 4 m3 bolts. 2 for the wing locks and 2 to hold the nose on.

1 22xx motor. I used a cheap 2205 quad motor from aliexpress. https://s.click.aliexpress.com/e/_oEObosX
4x 3.7g servos. https://s.click.aliexpress.com/e/_oD13F55
ESC/FC/FPV set up of your choice.
Nose currently set up for 22mm FPV cam


Printed in ABS the weight of the printed parts was 215g. AUW with a 2200mah 3s is 490g. First maiden it needed a thrust angle change on the motor.

Use hot glue to hold the servos in.