MicroCube redesigned Build Platform / Bed Mount

I used my existing design from this buildplate holder (https://www.thingiverse.com/thing:2820435) and applied it to the MicroCube. This design is using a standard 100mm x 100mm mirror tile (german "Spiegelfliese") as printbed. The tile can be removed and swapped out for another one (for example with a different surface). I used to print on bluetape and recently switched to a BuildTak surface. It works really nice and I like the simplicity of this design.

To print this you need the files Bed_Mount_v2_mount.stl and Bed_Mount_v3_plate.stl. You can also print 4x MicroCube_ThumbWheelM3.stl for the adjustment thumbscrews.

Please see https://www.thingiverse.com/thing:2988574 if you have trouble reaching the limit switch for the z axis with the screw.

The other stl file is only needed if you want to make changes to the SCAD file. I used the original mount, chopped some parts off and attached new ones. The SCAD generates both the mount and the plate, see bottom of the file (comment the