Microphone Flag for Hyperx Solocast

This is a Microphone Flag, yes I also didn't knew it had a name, but is just the thing that goes in the Microphone to display an image, in this case the idea is to use it with a printed sticker so it can be reused.It was designed for a Hyperx Solocast Microphone, but I guess it should be able to be used with any microphone that can use a 5/8 inches stand. The mic arm that I have uses a 3/8 screw, and the Holocast have threads for both.There are 2 flag versions, one with a hole for a cable and one without, the flag size is 66mm x 66mm. Both flags have space to move the them closer or further away from the mic, but is just 6mm.I used Bambu basic black PLA for the prints, and I recommend to use the 0.2mm nozzle for the threaded fastener or print it with an small layer height. I didn't try to print the fastener with the usual 0.4mm, I just use the 0.2mm one each time I print a thread. I printed with 25%-30% infill just to give it some strenght but it doesn't require a lot of ma