MicroSwiss Direct Drive CR10-V2 Conversion

Update: Version 2 is thicker and I use PLA+ to print it to get more rigid especially on the area where BL Touch is mounted.




Custom Mount of MicroSwiss Direct Drive Extruder. The housing design leverage the existing front cover since it already has a nice duct air cooler and to achieve close to original looks of CR-10 V2.

Materials needed.

- Printed in PETG material with .2mm resolution.
- You need one M3x8mm screw to mount the backing housing to the plate.
- You also need to replace the X-axis timing belt. The existing one will be shorter for the MicroSwiss mount. Here's the link for the timing belt: https://amzn.to/3fiKZpd

Instructions on how to install:

- Assemble first the heater block. These include the extruder head and heater and sensor.
- Alight the heater block to the new back housing. Slide the PTFE tube from the top all the way through the heater block.
- Install the back housing by sliding the top side of the PTFE tube to the MicroSwiss plate,