Miku Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 136.11x180mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm #000000 PLA+ Sunlu Black Transmission Distance: 0.6 #536c8b PLA esun grey blue Transmission Distance: 3.2 #9b9ea0 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 #d22332 PLA+ Sunlu Red Transmission Distance: 6 #ffbac3 PLA+ Sunlu sakura Transmission Distance: 6 #01b3ff PLA+ Sunlu Sky Blue Transmission Distance: 4 #fdcc1a PLA+ sunlu vivid yellow Transmission Distance: 2.6 #ffffff PLA+ Sunlu White Transmission Distance: 5This print uses 8 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to grey blue At layer #10 (0.88mm) swap to Ash Gray At layer #13 (1.12mm) swap to Red At layer #14 (1.2mm) swap to sakura At layer #16 (1.36mm) swap to Sky Blue At layer #19 (1.6mm) swap to vivid yellow At layer #20 (1.68