Milwaukee drill attached bit holder

Requirements.
1 - 10mm x 45mm x 3mm magnet
2 - Cylindrical magnets 6.5mm (0.25") diameter or less.
2 - #6- 32 UNC screws, threads 10mm (0.375") long.
Your favorite glue.

This is the best drill attached bit holder you will find. (until someone remixes my design lol)
Enough space for 7 drill bits (2 @ 125mm, 5 @ 25mm)

Disclosure - This model is based off of a broken magnet. this is the original > https://a.co/d/fyuMdTB < but had broken to 45mm. So you can either break yours also, or open the slot using various methods. I didn't want to remodel while not knowing if this will be a desired product, but I am willing to make changes upon request.

Printing.
I wanted this thing strong, so i went with 5 walls and 100% infill. its not going anywhere and worth it.
I oriented my print with the 2 short arms in the Z axis, that worked fine.
No supports required in that orientation.

Assembly.
Take a cylindrical magnet, place it on the flat end of a 125mm bit. apply glue and push into deep hole un