Milwaukee M12 lantern/torch

This is a lantern-type flashlight for Milwaukee M12 battery.

It is my first design made with Fusion 360, so the quality of it may be questionable, but if you want to use it, go ahead.

**BOM**

To assembly it, you will need:
- 3d printed base - a material with high heat resistance (like ABS/PETG) is recommended.
- 3d printed led strip holder - a material with high heat resistance (like ABS/PETG) is recommended.
- 3d printed shade - a transparent material with high heat resistance is needed. I used transparent PETG.
- 150cm of 12V, self adhesive, white LED strip
- 2 pieces of [6.3mm spade male connectors](https://www.aliexpress.com/item/32655259302.html)
- 1 piece of [21x15mm rocker on/off switch](https://www.aliexpress.com/item/32691789699.html)
- 35cm of wire
- soldering iron

**Printing instruction**

**Important note:** Depending on the power of the LED strip you plan to use you may need to choose a material with high heat resistance for all parts.

*Base*

Pr