Mimikyu - Hueforge

My first try, so don't expect nuch.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 110.33x165.5mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Blue Gray Transmission Distance: 3This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #12 (1.04mm) swap to White At layer #13 (1.12mm) swap to Yellow At layer #25 (2.08mm) swap to Blue Gray for the rest.