Thingiverse
Minecraft lantern lamp
by pawelmim
20
Downloads
38
Likes
1
Makes
Dimensions 170/170/278 mm
As a light I used an RGB LED strip for TV on USB, from the bottom you can put inside the powerbank, and it works.
As a glue for elements I used some epoxy 2-component glue, and thermal glue in some spots. I recommend using a soldering iron to mount the handle. (but the glue itself will be good anyway, it will last too)
Ultimately, the project assumed the installation of an E14 bulb holder, also led with a remote control.
THERE ARE NO CABLE HOLES IN THE PROJECT
lamp vid: https://drive.google.com/file/d/1-vNSgakRCotq_oDvCXgzvEr7UliIKCOI/view?usp=sharing
As a light I used an RGB LED strip for TV on USB, from the bottom you can put inside the powerbank, and it works.
As a glue for elements I used some epoxy 2-component glue, and thermal glue in some spots. I recommend using a soldering iron to mount the handle. (but the glue itself will be good anyway, it will last too)
Ultimately, the project assumed the installation of an E14 bulb holder, also led with a remote control.
THERE ARE NO CABLE HOLES IN THE PROJECT
lamp vid: https://drive.google.com/file/d/1-vNSgakRCotq_oDvCXgzvEr7UliIKCOI/view?usp=sharing
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
