Minecraft

Project: creeper.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x174.75mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA Default White Transmission Distance: 5 PLA Default White Transmission Distance: 5 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA PolyLite White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with White At layer #4 (0.4mm) swap to White At layer #5 (0.48mm) swap to Black At layer #11 (0.96mm) swap to BambuLab Green At layer #20 (1.68mm) swap to White At layer #25 (2.08mm) swap to BambuLab Green for the rest.