Mini Battery Tester

Easy to make, DIY battery tester.

Printed parts are ABS on Stratasys 200mc. Sparse high density infill setting. Used rafts and support, especially for the bottom panel.

Other than the printed parts, you will need:

- a power switch. I used a SPST rocker switch from Radioshack https://www.radioshack.com/products/spst-red-rocker-switch

The box is designed to fit this switch, but any switch can be used. You will probably have to modify the box to fit a different switch.

- x2 Soldering heat clips
https://www.radioshack.com/products/soldering-heat-sink-clip-tool

Any piece of thin metal will work. I used these because they were cheap, on sale, and easy to work with.

- a mini volt meter. There are lots that can be found on Amazon pretty cheap.
https://www.amazon.com/SMAKN%C2%AE-Voltmeter-Digital-Display-Detector/dp/B00N71QLCK/ref=sr_1_33?ie=UTF8&qid=1529679939&sr=8-33&keywords=mini+volt+meter

I made sure to get one that had 3 wires already attached so I wouldn't ha